Saving an Almquist Sabre – A Trip Through Time With Clark Mitchell and the ‘Macaroni Monza’ – November, 2012

Hi Gang…

We’re building a community….a “fiberglass community” that is.

Several years ago I had the honor of meeting a gaggle of ‘glass guys from the Northeast Jack Woolridge, Bill Jackson, and Roger Adam – spearheaded by Clark Mitchell.  Most of these guys had been friends with each other for over 50 years and all centered around now good friend Clark Mitchell.

Clark had sought out our group because of his heritage with fiberglass – specifically Harry Heim and Clearfield Plastics.   Harry Heim was the originator of the Sabre body and proprietor of Clearfield Plastics who then went on later to become associated with Almquist Engineering(Click here to learn more about Clearfield plastics here on Forgotten Fiberglass.)  Harry was a friend of Clark’s and both went on to co-design the first Sabre body which was later sold by Almquist.

0

From Left to Right: Clark Mitchell, Harold Pace, Shelley Pace – at the 2010 Amelia Island Concours d’Elegance

Recently, in a trip that Rick D’Louhy and I took late last year to save a few fiber-treasures, our paths crossed with Clark in a very special way.  We were on our way to save an Almquist – Fiat Topolino chassis and all.  This car was locked away in a barn and never assembled – it still had the original fiberglass windshield posts and seats – parts I had only read about and never seen.

And then the trip got really special.  I called Clark Mitchell and told him “what” we were on our way to save – and invited him to join us – and he did!  Today we’ll feature Clark’s thoughts on the beginnings of the Clearfield Sabre and his role with Harry Heim.  In addition, Clark will share his thoughts on our “find” and his participation in its recovery.

By the way…to get a feel for the adventure you’re about to read and the man – Clark Mitchell – here is a series of photos I took of Clark as we approached him off the Interstate and began our adventure that day:

1

2

3

I think Clark is dancing here…

4

5

And with that….away we go.  Take it away Clark 🙂

Memories Near and Far and the Macaroni Monza
By J. Clark Mitchell:  November, 2012

To those of us who wonder from time to time, where did all of those first edition bodies go that were designed by Harry Heim and me?  Well, the first one went to one of Harry’s racing buddies, John Iglehart.  John had sent Stanguellini chassis specs to Harry with the request, “Design and fabricate a lightweight fiberglass body representing the Italian style that is a little ahead of its time.”

As a junior in high school, I had requested and received information regarding a contest/program offered by Fisher Body Craftsman’s Guild to encourage young people interested in automobile design of the future.  I followed all of their well thought criteria for us car crazy youngsters…except for the part about mailing all of those  two-dimensional drawings transformed to 3-D to them. 

This is the follow through that many teenagers don’t choose to do.  Yes, it’s a choice, and many of us do remember., by recalling usable ideas that we  save in our ideational parts bins.

img094

Clark Mitchell in his newly finished Clearfield Plastics Sabre – circa 1955

When Harry Heim convinced me to share my designs to convert a Crosley to a Class H Modified sports car, his questions regarding my Fisher Body Craftsman’s Guild efforts caught his attention.  It was then he asked me to collaborate with him on Iglehart’s project.

Between that time and my attending Penn State in the fall of 1954, we were able to pull the first fiberglass body from the female mold in the factory parking lot in Clearfield, Pennsylvania on a sunny autumn morning.  “Hey Harry, the way the sun is back-lighting the body, it looks like macaroni!”  Harry instantly responded, “Hey Clark, we’ll call it a ‘Macaroni Monza.’  Everybody wants to call a pseudo-sporty car a ‘Monza,’ and ours has really sporty coachwork.”

Harry Heim’s consistent high level of ‘a little ahead of its time’ success was fueled by Heim’s passion for pursuing “life in all of its manifestations.”  A concept penned and promoted by the British philosopher Sir Alfred North Whitehead more than one hundred years ago.

As agreed, the second body went to me, third to Harry and we helped each other fasten the fiberglass bodies to a Fiat Topolino chassis that Harry had located in Troy, Pennsylvania.  Over the next year with a bunch of guys, who are now, thanks to Geoff Hacker and Rick D’Louhy, part of the “Forgotten Fiberglass Sports Cars of the Fifties” clan – 1954 to 2012 – fifty-eight years later and way back then until now and beyond….we’ve continued to form a “bondo” and have fallen in love with Polly Ester!

7

The Almquist Body and Parts Were Locked Away in this Barn

This fall I got a cell call from Geoff Hacker who was traveling on Interstate 80 past Clearfield trailering a Glasspar sports car that he and Rick had procured in Tennessee.  They were on their way to Bennington, Vermont to meet with Hemmings Motor News people, and back to Albany, New York. 

They would be connecting with Interstate 88 that leads to Binghamton, south on Interstate 81, and with the aid of the well informed mistress of the highways, Miss Garman, who will tell them how to return to Florida. 

During that phone call, Geoff set up a plan whereby we could meet at an exit on Route 88 and caravan to a place where an owner of an original Macaroni Monza / Almquist Sabre had one for sale – along with its original Fiat Topolino chassis.

8

First we found the fiberglass body and parts….

9

Then we found the Fiat Topolino Chassis…

10

And finally we found the Crosley engine…

We followed the owner of the Sabre, Lisa, to an old farm where the body and chassis resided.  Think about it.  After fifty-eight years I was going to see one of a couple hundred of these Class H modified bodies along with a favorite chassis of the era, a Fiat Topolino.

On the drive south from our home in the town of Ausable in Adirondack Park, to who knows where along Interstate 88 to see good buddies Geoff and Rick, I searched my ideational parts bin to create strategies to comprehend the phenomena of this day.

DSC_0198

DSC_0205

Rick and Clark Worked To Disassemble A Wall of The Barn – That Was The Only Way To Remove The Body…

DSC_0210

I hadn’t seen one of these bodies, other than the ones that Harry and fellow Pennsylvanians had assembled years before.  Today I was going to see one of the first edition bodies that we fabricated in the old hometown!  And I’m driving our bright red Porsche Boxster – same color as my wonderful old pedal car from my youth.  What a trip!

Another call from Geoff and  I exited soon after, waited a couple of minutes, and they pulled up behind.  “We’re going to meet the owner in the next town, then follow her to pick up the body and chassis.”  After brief introductions to Lisa, we executed a three vehicle parade of mismatched motor cars, bouncing down a secondary road through the beautiful, typically central New York countryside. 

Little did we know then that when we departed Lisa’s property the Macaroni Monza body would be strapped upside down to the Glasspar with the Topolino chassis slid under the Glasspar.  Whoda thunk it – show of hands please 🙂

DSC_0211

Here The Owner, Lisa, Delights In “Pretending” The Almquist Sports Car Runs. By The Way…”Head Light Pods” were an option you could order on these cars, and this allowed the headlights to be mounted more conventionally on the forward part of the fender.

After we carried the body and the chassis and placed them on the trailer, I turned around and there were two bucket seats.  I  had stopped by Harry’s factory to borrow a tool that he had invented / fabricated that helped us install hinged doors on fiberglass bodies that customers commissioned us to install on their chassis.

This one was for Ed Almquist…a larger version of the original body.  I was working on it in one of the stalls of the garage owned by my father and his brothers – it was part of the Mitchell Milling Company property.  After Harry found the tool, I asked him, “Have you thought about what kind of light weight, comfortable seats we could get for our (emerging) sports cars?” 

He said, “Hold onto that post…both hands – ok?”

DSC_0254

Here you can see the seats that Clark is discussing in this story – the only one’s that Rick and I have ever seen.

WHAM!  He had come back with a 3’ x 3’ piece of sheet metal and used me as the mold for the back seat.  How ‘bout that for a custom fit solution!  “Now go over to the wood scrap box, get a piece of plywood for the seat and pieces to complete the mold, and tomorrow you can make yourself a bucket seat that fits your ‘bucket’!”

So…meantime….I’m looking at these seats…unpainted…right out of the mold.  I wanted to pick them up and hug ‘em.  But then I thought, “How many people other than J. Clark Mitchell have had that thought?”  And right away, Rick and Geoff, in unison shouted, “That kind of thinking can get you in DEEP polyester resin, with a dose of methyl-ethyl ketone peroxide in di-methyl phthalate!”

I knew I had met my match!  Then they were off to Florida and I briskly “Porsched” to Adirondack Park.

DSC_0249

DSC_0268

Geoff and Clark at Nighfall – with still more work to do loading the parts.

DSC_0265

Strongman Rick D’Louhy ready and able to help lift the heavy Fiat Topolino chassis on board our trailer.

DSC_0270

Geoff and Clark at Rest – Lisa “hamming” it up at dusk…still much work to do.

DSC_0274

Geoff and Rick – creative loading as ever – on our way home from New York to Florida. What a great experience this was, and it was great fun seeing Clark and meeting Lisa too.

Summary:

What a great story and many thanks to Clark Mitchell for taking the time to share with us his thoughts, memories, observations, and wry humor – all of it is always appreciated here at Forgotten  Fiberglass 🙂

Not recounted by Clark was how much “fun” it was removing the Fiat Topolino chassis from its perch in the rafters of the shed where it had been stored and then getting it through a narrow opening. Also, tall weeds and sticker vines on site complicated the extraction.

Hope you enjoyed the story, and until next time…

Glass on gang…

Geoff

——————————————————————–

* Click on the following link to view all stories on:  Almquist Sports Cars

——————————————————————–

* New Feature: To post your comments and thoughts about this story, scroll down the page and post your information in the section titled “Leave A Reply.”  Your name and e-mail address will be required, but only your name will appear – not your e-mail address.

* Click here to visit the Forgotten Fiberglass Forums and post your thoughts about vintage fiberglass cars.

* Click here to review the “Forgotten Fiberglass Vision Statement” as well as our “Approach to Research

* Click here to listen to our Podcast led by Todd Ruel of Gone Autos

* Click here to visit our Forgotten Fiberglass Facebook page

* Don’t Forget: We appreciate any and all donations to our Forgotten Fiberglass website.  Your donations help defray production costs.  To make a donation, look for the “Support Forgotten Fiberglass” box at the bottom right of our website and click on the word “Donate”.  All contributions help make “Forgotten Fiberglass” the best it can be.

——————————————————————-

Click on the Images Below to View Larger Pictures

——————————————————————-

 

Print Friendly, PDF & Email

Comments

Saving an Almquist Sabre – A Trip Through Time With Clark Mitchell and the ‘Macaroni Monza’ – November, 2012 — 9 Comments

  1. Man, what a great story! And of course in your inimitable way… a superb find! What you guys need is an extra pair of hands and eyes “up north” to help out!

  2. Another great story and great find Geoff and Rick! Man, that Topolino frame is a tiny piece, but as light as they were and with only 13 HP, that’s all that was necessary. The Glasspar looks very interewsting. That hood scoop looks like it’s covering a blower motor or something equally serious. I like the rear bumper treatment. How about a story on that car, too!

    Congratulations,

    Steve

  3. Can anyone share the exact location of the molding plant in Clearfield? We’re truly mystified on where this was located.

  4. 10.27.2018

    So, what’s the current situation on this amazing barn find ? .

    Everyone who’s read this will want to know .

    -Nate

Leave a Reply

Your email address will not be published. Required fields are marked *