Kaucher’s Koncepts: A Modern Take On A Classic – The Cheetah GTS

Hi Gang…

This is another in an series of ongoing articles and designs from the talented hands of Keith Kaucher – fan of fiberglass and consummate sports and custom car designer.

For years Keith shared his designs with the audience of Kit Car Magazine and other well-known automotive publications showing how fiberglass bodied sports cars could be finished out as well as modified with exciting design changes.  Keith’s work inspired his audience to tackle projects they may have not considered before, and to bring to life exciting and inspired designs.

It’s for these very reasons that I’m honored to share his thoughts and work with you, and welcome Keith as a contributor to the growing audience here at Forgotten Fiberglass.

Take it away Keith!

Here's An Original Cheetah - Beautifully Restored

Kaucher’s Koncepts: The Cheetah GTS

Growing up I was a huge Chevy fan to the point of fist fighting over who was better – Chevy or Ford.  By the time I got to High School, I had eased up a bit on the Chevy and Ford wars, but as things worked out, my best friends were all Ford nuts.  I got the dominance of the Shelby Cobra  in racing shoved in my face all the time whenever the subject would come up.

Then one day I heard about this mysterious little Chevy powered race car called a Cheetah.

I went to the school library and researched every article I could find about this machine.  It turned out that it was built in Southern California, was lighter than a Cobra, and had as much horse power as 427 Cobra.  And I later learned that the motor was set back so far behind the front axle that it used one U joint instead of a driveshaft.  To top it off – it was clocked a 215 MPH!

I now had a Chevy powered hero to throwback at my Ford buddies.

With all this given, I still thought that the car could use a bit of a restyle.  The basic lines were there but let’s face it – the Cheetah was a purpose built racecar – not a street car, and styling wasn’t a priority when this car was designed as a whole.

However, since I first laid eyes on a Cheetah, I thought someday I really need to see what could be done to improve the lines of the fast cat.  The first thing I did was lengthen the wheelbase to 95 inches which allows the driver to sit lower as the foot boxes have been enlarged, the motor has been moved forward, and the entire passenger compartment has been stretched.

With the driver sitting lower, the roofline can be dropped an inch or two which gives the car an overall better flow front to back. I also added more overhang in front of the wheels and behind the rear of the wheel, as well as razor thin bumperettes.  These are similar to the ones used on the Corvette, and adorn the front and rear of the car – giving it a more road going GT appearance.

The windshield and side window glass is from a 1970-80 Datsun 240-280Z car and the rear window glass is borrowed from and 1968- 74 MGB GT.  The finished design resembles a Jag XK-E only more aggressive.

So if you love the Cheetah as I do but want to have some creature comforts like roll up windows – this may be the answer.

This Shows Keith's Updated Design - The Cheetah GTX Sports Car. Great Job Keith!

Summary:

Great job Keith and thanks for sharing your thoughts and design with us here.

Keith used Adobe Photoshop to create the realistic designs he shared with us in the story today, and he uses it as well in producing custom work for his clients.  Keith also does full hand or computer renderings of car designs for his customers.  He’s one versatile guy!

To see more of his design work, please visit:  www.kaucherkustoms.com

Thanks again to Keith for sharing his vision for making this car a reality.   Hope you enjoyed the story, and until next time…

Glass on gang…

Geoff
——————————————————————–
* Click on the following link to view all stories on:  Keith Kaucher Designs
——————————————————————–

* Click here to visit the Forgotten Fiberglass Forums and post your thoughts about vintage fiberglass cars.

* Click here to review the “Forgotten Fiberglass Vision Statement” as well as our “Approach to Research

* Click here to listen to our Podcast led by Todd Ruel of Gone Autos

* Click here to visit our Forgotten Fiberglass Facebook page

* Don’t Forget: We appreciate any and all donations to our Forgotten Fiberglass website.  Your donations help defray production costs.  To make a donation, look for the “Support Forgotten Fiberglass” box at the bottom right of our website and click on the word “Donate”.  All contributions help make “Forgotten Fiberglass” the best it can be.
——————————————————————-
Click on the Images Below to View Larger Pictures
——————————————————————-

Print Friendly, PDF & Email

Comments

Kaucher’s Koncepts: A Modern Take On A Classic – The Cheetah GTS — 6 Comments

  1. Thanks Geoff for the nice intro and post comments. It sure would be great to see this car resurrected in a more street-able form which is something Bill Thomas was planning on in the future if the fire hadn’t wiped out the Cheetah dream.

  2. I like it. I think it captures the spirit of the original beast, but with a bit more grace than the straight-outta-the-wild original. Keith’s right, if only the factory had survived the fire; imagine what history may look like today!

  3. Keith- Could you give us some specifications on the car such as, wheelbase, track, width, height at roof, height at cowl, overhang-front and rear, etc.?

    The Cheetah has always been a favorite of mine since day one.

Leave a Reply

Your email address will not be published. Required fields are marked *