The 1953 Manta Ray Concept Car: Rod & Custom, February, 1954


Hi Gang…

Concept cars were not all built by and for the Big Three in Detroit.

Small shops and creative and talented individuals built concept cars as far back as the 20s and they are still building them today.  But when “concept cars” are brought up in an article or conversation we tend to think “GM Motorama” or other show cars/concept cars of the big  manufacturers.  It just wasn’t so.

Let’s break out of that mold and start considering some of the concept cars that were built in the postwar era by individuals and coachbuilders that were celebrated back in the day and represent some of the finest and most imaginative work of the era – like the 1953 Manta Ray. 

And to kick this off, let’s look at one of the best articles on this car – an article written by Dean Moon of “Mooneyes” himself.

We tend to think of Dean as the owner of the famous speed shop from Santa Fe Springs, California – only.  And it’s true that he owned this and built it into a powerhouse.  What’s also true is that Dean was an author and a photographer, and he captured some terrific stories and photos from this era as no one else did.  This is one of my favorite story that he penned – and one of my favorite cars too.

So…off we go and let’s see what Dean Moon had to say about this special concept car from 1953.

2014-09-07_003151

The Manta Ray:  A Dream Translated to Plastic Reality
By Dean Moon
Rod & Custom, February, 1954

Beautifully expressed in fiberglass are the ideas and imagination of Glenn Hire and Vernon Antoine in their exceptional example of automobile styling and building.  Wanting to incorporate the swift flowing lines of a jet fighter plane into a car’s styling, they converted their Whittier, California garage into a workshop and set themselves to their task.

Both Antoine and Hire are employed by North American Aviation Company in the engineering and designing departments of the guided missile and jet aircraft divisions so they were well qualified to transfer their drawings and sketches into reality.  A year later, and with 4000 hours of hard, spare-time work under their belts, the men rolled the Manta Ray – as it is appropriately named – out of the shop.

2014-09-07_003203

Being more interested in appearance than in actual performance, the engine and chassis departments were left strictly alone except for the 3” shortening of the frame side rails.  The chassis and power plant assemblies are 1951 Studebaker, chosen for the simplicity of structure and the light-weight characteristics.

Even with the thoughts and determination of the two experienced men all did not go as well with the body as might be expected.  Many seemingly insurmountable problems had to be overcome as the work progressed.  Problems like the determining of the number of body mounting brackets, their design and installation.

2014-09-07_003216

Body contours had to be kept within certain limitations so the shell could be removed from the mold.  The final design had to be decided upon, the location of the inner panels determined and the finished layout of the instrument panel designed for once the molds were completed little change could be made without a terrific amount of rework.

Nevertheless, the dream became an actuality and the builders say that the job turned out even better than they had planned.  At a recent automobile show held in Los Angeles, Glenn and Vernon received a special trophy, as well as a cash award, from a local newspaper for “Outstanding Creativeness and Engineering.”  Upon completion of the show Bob Yeakel, a leading Los Angeles auto dealer, became so enthused after seeing the car, and later driving it, that he purchased it from the owner-builder team.

2014-09-07_003316

Interest didn’t cease there, however, for Bob Yeakel has given the go-ahead to Glenn Vernon on the production of the same car for a select clientele.  (Editor Note: Bob Yeakel is no newcomer to the pages of Rod & Custom.  It was he, you will remember, who helped to build and who drove the first jet car.  See Rod & Custom for June, 1953.)

The new version of the car will differ mainly in the engine and chassis.  The frame itself will be constructed of tubular steel for extra strength and rigidity, and the power will be supplied by a Cadillac engine, with Hydramatic transmission, unless the purchaser demands otherwise.

2014-09-07_003249

There is even some discussion of whether to include a supercharger but this will probably be classified as optional equipment.  The seating capacity will be increased from three to four persons, however, the single seat design will be retained.

Another feature of the planned models will be an accelerator pedal operated by the left foot with the brake pedal operated by the right.  Yeakel claims that this makes stopping considerably quicker, for less time is required for brake application.

As for the body of the present car itself, it is a masterpiece of quality workmanship and one has to see it to truly appreciate it.  A common detriment to plastic bodied cars is the waves and ripples that immediately mark it as being made of material other than metal.  Not so with the Manta Ray.

2014-09-07_003238

The mirror-like finish, with no wrinkles or other imperfections, was achieved only after countless hours of sanding, priming, more sanding and so on.  All the seams, creases and contours are exactly as intended; either straight as a die or smoothly curved, whichever the case may be.

Many sharp-eyed enthusiasts will immediately not its resemblance to General Motors LeSabre.  True, LeSabre prompted the general appearance of the Manta Ray but the relationship is only superficial.  The nose piece was first pattered in wood then a 1/4 “ thick casting was made which was chrome plated. 

The taillights – all three of them – are immediately recognizable as being from a Lincoln, which is exactly what they are.  The fact that the taillights do not “fit” in the openings provided in the body was done purposely – to match the type of styling used on fast jet planes. 

2014-09-07_003302

The three ports in the rear bumper were intended to provide outlets for the exhaust but it was decided that the corrosive effect of the gases would mar the bumpers chrome.  Therefore, the exhaust was re-routed beneath the car in the traditional manner.

Upon completion, the car was painted a metallic golden shade of lacquer which suits the car perfectly.  Needless to say, the car attracts a great amount of attention whenever it is driven around town – and well it should.  This is a one-of-a-kind car down to even the tiniest of details.

Summary:

And the good news gang is that the car survives.  This was first reported by good friend Sondre Kvipt of the Kustomrama website.   The owners of the Manta Ray have had it in their family for nearly 50 years or more, and are they are also part of the Forgotten Fiberglass aficionados.  You’ll meet them and their car soon.

So were others built?  If so, where are they?  And why did the car disappear for so many years?  Answers to these questions and more will be revealed in future stories here at Forgotten  Fiberglass.

Hope you enjoyed the story, and until next time…

Glass on gang…

Geoff


Comments

The 1953 Manta Ray Concept Car: Rod & Custom, February, 1954 — 11 Comments

  1. I had to have seen this car in person as a youth. My parents from Abilene belonged to the Midway Antique Auto Club ( of Salina, KS ) for a long time. It was probably in the mid 1970s (?) we went as a group to Junction City to look through several ( I forget how many ) warehouses of the Lacer collection. I would have been about 10 years old at that time. I cannot recall actually seeing this car since this is a 45 year old memory by now. I really don’t remember much about the whole day other than seeing some cool and/or unusual cars.

    On a side note, my wife is originally from a town between Abilene and Junction City. D.E. Lacer’s son was a friend of my wife’s brother. We were visiting once when they were both middle school age kids. I mentioned to the Lacer boy that I had toured his granddad’s warehouses years ago. He quickly told me that he didn’t believe me. He said something like, “his granddad didn’t show off his cars”. I kindly told him that he did indeed ( at least once ).

  2. Came across your website after seeking further information on the Manta Ray. That was a great article penned by Dean Moon.

    The original builders of the car were true visionaries. Imagine just the effort to mold and cast the cars “bullet nose”

    There was no mention if these fellows were commissioned by any of the mainstream manufacturers?

    Thank you for posting it and also for your efforts in bringing more of these forgotten “one off,s” into the light of day

  3. Pingback: Kennt den jemand? : US Cars

  4. THE MANTA RAY IS ACTUALLY BEING DETAILED AND GETTING IT TO RUNNING,DRIVING AND MORE IMPORTANTLY STOPPING CONDITION FOR A VERY WELL KNOWN CAR SHOW IN MARCH.MY NAME IS MIKE WALSH AND I OWN WALSH CUSTOMS IN JUNCTION CITY KS. MY SHOP WAS COMMISSIONED BY DE LACER TO DO AS LITTLE TO THE MANTA RAY AS TO NOT DISTURB THE ORIGINALITY OF THE VEHICLE. I FEEL VERY PRIVILEGED TO HAVE THE OPPORTUNITY TO BE APART OF THIS CARS HISTORY. SPECIAL THANKS TO JAMES WALSH[MECHANICAL] JASON [DETAIL]AND MCPHERSON COLLEGE AUTOMOTIVE RESTORATION [MCPHERSON KS]FOR SENDING JASON TO INTERN ON THE MANTA RAY. ALSO THE CAR DOES HAVE A CADILLAC 331 WITH DUAL 2 BARREL CARBS. THANKS AGAIN LACER.

  5. LAST WEEK I HAD THE OPPERTUNITY TO SEE THE MANTA RAY THAT WAS AT A CUSTOMS SHOP BEING CLEANED UP TO BE SHIPPED TO FLORIDA.I HAVE TO SAY ITS VERY IMPRESSIVE AN DIFFERENT.

  6. Pingback: From Detroit to Moscow, L.A. to Ravensburg: the XP-8 Le Sabre’s direct design

  7. I was able to see the car recently. What a treat. It’s full of 1950’s iconic design symbols. It’s also in easily restorable condition needing only some basic work. The color has been changed but that would be easy to remedy!

  8. The use of the 1952 to 54 Lincoln taillights is an interesting idea. I had several out in the shop and kept thinking that if they were turned on their back, they would make a neat rear for a head rest + giving a large stop light for a race car.

Leave a Reply to hugh Cancel reply

Your email address will not be published. Required fields are marked *

Your email address will not be published. Required fields are marked *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.